reliability @EGW
|
|
reliability @EGW |
| Polish, throat, tune extractor, polish bolt face, check chamber, adjust ejector face |
$85.00 |
| EGW Long ejector for .45 | $55.00 |
| EGW Long ejector for Commander, 38, 10mm | $55.00 |
| Fit and tune spare extractor | $45.00 |
| Lower ejection port and clear | $40.00 |
| Lower, flute, and clear ejection port | $75.00 |
| EGW Oversize firing pin stop fitted | $35.00 |
| Install EGW Officers bushing, guide rod, reverse plug | $125.00 |
| Install insert feed ramp (aluminum frame guns) | $150.00 |
| French border on slide | $75.00 |
| Leibenburg cuts, the ball cuts
to produce the lookof the original 1911 Springfield. |
$75.00 |
| Browning High Power cuts,
Combine the leibenburg cut and cutting the flats on the front of the slide down to look like a BHP |
$150.00 |
| Decorative ball end mill cuts on the top of the slide | $100.00 |
| Test fire gun* | $15.00 |
| *Required for all Accuracy Work |
Copyright © 1998, 2000 EGW. All rights reserved.
Website developed and maintained by Kevin
J. Solito.
Please contact the webmaster if you encounter
any problems with the site.